Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RADILON D 40P50K 100 NT - PA610 - RadiciGroup High Performance Polymers

Check here, which other Radilon D datasheets, application examples or technical articles are available in Material Data Center

机械性能 - 热性能 - 电性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

PA610 flexible, high viscosity extrusion grade. Plasticized. Heat stabilized. Natural colour.

Suitable for extrusion of tubes and profiles. Typical application: air pressure pipes. This grade is partially renewably-sourced (64% of base polymer by weight).

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	750 / 530	MPa	ISO 527
简支梁缺口冲击强度, +23°C	25 / 35	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	6 / -	kJ/m²	ISO 179/1eA

热性能	干 / 已调节	单位	Test Standard
ISO数据
熔融温度, 10°C/min	215 / *	°C	ISO 11357-1/-3
热变形温度, 1.80 MPa	50 / *	°C	ISO 75-1/-2
线性热膨胀系数, 平行	136 / *	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	130 / *	E-6/K	ISO 11359-1/-2

电性能	干 / 已调节	单位	Test Standard
ISO数据
体积电阻率	1E13 / 1E11	Ohm*m	IEC 62631-3-1
表面电阻率	* / 1E10	Ohm	IEC 62631-3-2

其它性能	干 / 已调节	单位	Test Standard
吸水性	2.5 / *	%	类似ISO 62
吸湿性	1.1 / *	%	类似ISO 62
密度	1100 / -	kg/m³	ISO 1183
Biobased content	60	%	-

函数

典型数据

加工方法

注塑, 管材挤出, 异型材挤出成型

供货形式

碎粒料, 自然色

添加剂

增塑剂

特殊性能

经热稳处理的/耐热的

Certifications

生物相容

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

该材料用防水包装运输，已经为后续加工准备好。最合适的加工含水量最大值推荐为0.1%。除湿干燥机的典型条件：温度80°C，露点-20°C或更低，时间2-4h或更多。注意避免材料吸水以及添加再粉碎材料时混入其他聚合物的污染。颜色变化及机械性能下降可能会发生，需要仔细监控。

Injection Molding 加工参数

熔融温度	模具温度	注塑速
230 - 260°C	70 - 80°C	中

挤出温度
240 - 290°C

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.